I have a 1992 Chev. k1500 silverado. Frequently when I go to start it up the starter just spins a time or two before finally catching. I had the starter tested & it checked out ok @ the parts store. What should I check next?
Sounds like the bendix drive is not kicking in. You can change just the bendix dtive or it is easier to just replace the starter. The temperature has a lot to do with it not engaging and that is probably why it worked ok at the parts store.
can i put a 2.2 turbo engine from a mazda 626 to a ford probe GL 2.2 NON TURBO
I believe the motors are the same but the turbo will not work. You would have to use the non-turbo set up to make it work in the probe
my starter was doing that on my 96 dodge neon replaced it with a brand new one now when i go to start it all it does is make a clicking sound and wont start some one tell me why
Check to see if the electrical cable from the battery is making good contact at the starter. If it is I have run into faulty rebuilt starters. You need to take it back to the shop you bought it from and have them test it.